Your cart is empty

Your wish is empty

PreviousNext

EFR 7163 57mm Supercore | Aluminum

Applicable Turbine Housing

Part N: 11637105000
in stock

Shop Local

Shop locallyChange >

Shop Local

Close X
Currently located
AGP Turbochargers, Inc.

1930 East 3rd Street #12

Tempe, AZ 85288

63.3 Miles
Full-Race Motorsports

5019 E Madison St.

Phoenix, AZ 85034

65.6 Miles
  • Details
  • Specs
  • Compressor Maps
  • Installation Drawing
  • Service Products

Details

The EFR 7163 is the largest ball bearing turbo within the B1 series, and it dominates on the track thanks to unmatched spool up and performance.  The EFR 7163 is a star performer because it employs many of the special features that BorgWarner supplies to Honda and GM for the ITT INDYCAR Series engines—2.2-liter twin EFR 7163 turbocharged V-6.  Unique to the 7163, this turbo has both Gamma-Ti as well as a unique mixed flow turbine wheel which improves efficiency of the turbine wheel (i.e. boost comes on even sooner).                      

This is an advanced ball bearing turbocharger with Gamma-Ti turbine wheel technology which greatly improves spool-up. EFR turbos have the competitive advantage over other brands thanks to the lightweight turbine wheel material which cuts turbine inertia in half vs. Inconel. Gamma-Ti (aka Titanium Aluminide) is commonly used in aircraft turbine blades which provides strength and weight reduction. Since it requires less energy to accelerate the wheel, higher speeds can be reached sooner and as a result the on-engine boost response improves while the competition is reaching for the NOS button to catch up!

EFR 7163 is sized just right for single turbo applications making up to 550 HP or up to 1,110 in twin configurations!  This turbo also is a top choice for 4 cylinder, 6 cylinder, single turbo setup, rotaries, twin-turbos V6 and V8s, and a variety of other race applications. 

Features include: 

  • 11637105000 = EFR 7163 57mm Supercore | Aluminum
  • Max flow rate: 60 lb/min
  • Gamma-Ti ultra-lightweight turbine wheel | MIXED FLOW
  • Dual ceramic ball bearings with metal cage
  • Forged milled aluminum compressor with extended tip
  • Integrated compressor recirculation valve (blow off valve or BOV)
  • Electronic boost control solenoid
  • Water-cooled center section
  • Bearing housing options: aluminum
  • Stainless steel turbine housing options:
    • T25 Single Scroll = 11631008000 (0.80 A/R) internal wastegate
    • V-Band Single Scroll = 11631008001 (0.85 A/R) internal wastegate
    • T4 Twin Scroll = 11631008002 (0.80) internal wastegate
    • V-Band Single Scroll = 11631008003 (0.85 A/R) external wastegate I-Type
  • Sold in both turbocharger and supercore configurations
  • Core assemblies, just the cartridge, can be purchased for quick repairs. This is the best method to make a repair as they come pre-balanced with new wheels which avoids the need for special rebuild tools (check that your end-housings are reusable).

All INDYCAR V6 engines (Honda and GM) come standard with twin EFR 7163 turbochargers!  Boost your engine like the pros and choose EFR for your next build!

Not sure which size turbo you need?  Visit BorgWarner’s Match Bot to which will help you properly pick the best turbo for your application and goals. 

Product use:  For off-road use only in performance race applications. 

EFR B1Comp Wheel ODComp Wheel Inducer DiaTurbine Wheel ODTurbine Wheel ExducerPower Range HPTwin-turbo Power Range HP
716371.0057.0063.0056.00300 to 550 hp600 to 1,100 hp
625862.0049.0058.0051.00225 to 450 hp450 to 900
675867.0054.0058.0051.00250 to 500 hp500 to 1000 hp

Product use: For off-road use only in performance race applications.

warningP65 Warning

Specs

Power Range HP
300 to 550 hp
Comp Wheel OD
71.00
Comp Wheel Inducer Dia
57.00
Bearing Housing
aluminum bearing housing
Turbine Wheel Material
gamma-ti | mixed flow technology
Frame Size
b1
Turbine Wheel OD
63.00
Turbine Wheel Exducer
56.00
Twin-turbo Power Range HP
600 to 1,100 hp
Bearing System Type
dual ceramic ball bearings with metal cage
Water Cooled
yes
Bearing Housing Material
aluminum

Compressor Maps

Installation Drawing

Details

The EFR 7163 is the largest ball bearing turbo within the B1 series, and it dominates on the track thanks to unmatched spool up and performance.  The EFR 7163 is a star performer because it employs many of the special features that BorgWarner supplies to Honda and GM for the ITT INDYCAR Series engines—2.2-liter twin EFR 7163 turbocharged V-6.  Unique to the 7163, this turbo has both Gamma-Ti as well as a unique mixed flow turbine wheel which improves efficiency of the turbine wheel (i.e. boost comes on even sooner).                      

This is an advanced ball bearing turbocharger with Gamma-Ti turbine wheel technology which greatly improves spool-up. EFR turbos have the competitive advantage over other brands thanks to the lightweight turbine wheel material which cuts turbine inertia in half vs. Inconel. Gamma-Ti (aka Titanium Aluminide) is commonly used in aircraft turbine blades which provides strength and weight reduction. Since it requires less energy to accelerate the wheel, higher speeds can be reached sooner and as a result the on-engine boost response improves while the competition is reaching for the NOS button to catch up!

EFR 7163 is sized just right for single turbo applications making up to 550 HP or up to 1,110 in twin configurations!  This turbo also is a top choice for 4 cylinder, 6 cylinder, single turbo setup, rotaries, twin-turbos V6 and V8s, and a variety of other race applications. 

Features include: 

  • 11637105000 = EFR 7163 57mm Supercore | Aluminum
  • Max flow rate: 60 lb/min
  • Gamma-Ti ultra-lightweight turbine wheel | MIXED FLOW
  • Dual ceramic ball bearings with metal cage
  • Forged milled aluminum compressor with extended tip
  • Integrated compressor recirculation valve (blow off valve or BOV)
  • Electronic boost control solenoid
  • Water-cooled center section
  • Bearing housing options: aluminum
  • Stainless steel turbine housing options:
    • T25 Single Scroll = 11631008000 (0.80 A/R) internal wastegate
    • V-Band Single Scroll = 11631008001 (0.85 A/R) internal wastegate
    • T4 Twin Scroll = 11631008002 (0.80) internal wastegate
    • V-Band Single Scroll = 11631008003 (0.85 A/R) external wastegate I-Type
  • Sold in both turbocharger and supercore configurations
  • Core assemblies, just the cartridge, can be purchased for quick repairs. This is the best method to make a repair as they come pre-balanced with new wheels which avoids the need for special rebuild tools (check that your end-housings are reusable).

All INDYCAR V6 engines (Honda and GM) come standard with twin EFR 7163 turbochargers!  Boost your engine like the pros and choose EFR for your next build!

Not sure which size turbo you need?  Visit BorgWarner’s Match Bot to which will help you properly pick the best turbo for your application and goals. 

Product use:  For off-road use only in performance race applications. 

EFR B1Comp Wheel ODComp Wheel Inducer DiaTurbine Wheel ODTurbine Wheel ExducerPower Range HPTwin-turbo Power Range HP
716371.0057.0063.0056.00300 to 550 hp600 to 1,100 hp
625862.0049.0058.0051.00225 to 450 hp450 to 900
675867.0054.0058.0051.00250 to 500 hp500 to 1000 hp

Product use: For off-road use only in performance race applications.

warningP65 Warning

Specs

Power Range HP
300 to 550 hp
Comp Wheel OD
71.00
Comp Wheel Inducer Dia
57.00
Bearing Housing
aluminum bearing housing
Turbine Wheel Material
gamma-ti | mixed flow technology
Frame Size
b1
Turbine Wheel OD
63.00
Turbine Wheel Exducer
56.00
Twin-turbo Power Range HP
600 to 1,100 hp
Bearing System Type
dual ceramic ball bearings with metal cage
Water Cooled
yes
Bearing Housing Material
aluminum

Compressor Maps

Installation Drawing